|
Post by blitzkriegomega on Dec 13, 2013 11:34:06 GMT -5
I'm not sure if this is what you are refering to but this could just be the double jointed elbow, try rotating it into alignment with the other joint You can use that to bend Grendy's arm further up near the shouder Yeah that's the second joint so you get double jointed elbows. ...But why is it there? The upper arms prevent the forearms from fully bending. I dunno why is that ratchet joint existing! Never even seen special arm poses outta of them. Thanx, anyway... It's more of an atrifact from the SRC Mazinger Z and Great Mazinger...I prefer using the Ratchet before I use the friction Joint anyway...but that's just me I guess...
|
|
|
Post by greengetterguy on Dec 14, 2013 10:41:52 GMT -5
36 @ Amazon!
|
|
|
Post by kidomega on Dec 16, 2013 9:41:52 GMT -5
Hello, kidomega! Welcome to RJ You will meet a lot of cool and wonderful people here, really! I assume you'd be a friend of one or more of my friends on the French or Italian forums/FB...or maybe you're already on my FB list LOL! Thank you for the very warm and sincere welcome. I never joined those forums, just viewed them to look at the products. Well, we can scratch the Evas out, there are other good companies who make really good ones. I've purchased the whole Revoltech line, and they are pretty neat/. The Evas, not Gaiking or the Getter collection. My bad, you are right, its always the right leg, not the left, I mistakingly said left because I was holding the toy in front of me, so I thought it was the left. I, like many of you, buy multiple toys of the same robot, and they do not have loose joints, here I am speaking about the ones I have bought from Japan, not the US. They have very solid joints. I bought SRC Mazinger Z and Great Mazinger when they first got released from the US, and both have a loose right leg. The ones I bought recently do not have that problem. I don’t think you can solve this by squeezing the tube like joints inward, I have tried it. What would the glue do? I wanted to ask TheMazingerZ a very specific question or was it a request? I can't remember. And by the way, that guy, Actarus was it? The one who was building custom figures, yeah, he is working for High Dream ( I think I got the company name wrong).
|
|
|
Post by ryomakabuto on Dec 16, 2013 10:07:11 GMT -5
is the spacer getting made at all for the src grendizer?
|
|
|
Post by kidomega on Dec 16, 2013 10:50:45 GMT -5
...But why is it there? The upper arms prevent the forearms from fully bending. I dunno why is that ratchet joint existing! Never even seen special arm poses outta of them. Thanx, anyway... It's more of an atrifact from the SRC Mazinger Z and Great Mazinger...I prefer using the Ratchet before I use the friction Joint anyway...but that's just me I guess... I check last night and i found the double joint, but I couldn't bend it like Mazinger Z. Can you please post some pictures to show us a demonstration?
|
|
|
Post by kidomega on Dec 16, 2013 10:52:37 GMT -5
is the spacer getting made at all for the src grendizer? I believe it is, it will be a huge waste not to make it.
|
|
|
Post by gravewolf on Dec 16, 2013 11:14:58 GMT -5
is the spacer getting made at all for the src grendizer? I believe it is, it will be a huge waste not to make it. They HAVE to make it! It wouldn't be a complete Grendizer without the spazer! It was a mistake to release Grendy without his spazer, I'm certain this src would have sold more if they included it even it meant being a bit more expensive.
|
|
|
Post by ryomakabuto on Dec 16, 2013 11:24:51 GMT -5
it would have been more costly but worth it, like the upcoming genetic gao gai ger price.
|
|
|
Post by kidomega on Dec 16, 2013 11:34:17 GMT -5
They probably wanted to see how much Grendizer would sell and might do a weapon set for him or make us all buy it again because the spazer is bundled up with the Grendizer, like they did with the SOC releases. I want the other spazers too, they already have them from SOC, all they need to do is adjust the sizes a little bit.
|
|
|
Post by DUKE 77 on Dec 16, 2013 18:38:58 GMT -5
I am guessing if Bandai is making a SRC UFO Robo Grendizer spazer, then, there might be also a set of the other 3 spazers (Double, Marine, Drill). That would be so cool!
|
|
|
Post by gravewolf on Dec 17, 2013 0:19:57 GMT -5
I am guessing if Bandai is making a SRC UFO Robo Grendizer spazer, then, there might be also a set of the other 3 spazers (Double, Marine, Drill). That would be so cool! Yeah, it would be so nice if they release the spazers as a whole set. I wouldn't mind if it's as expensive as the src Grendy. SRC Grendy looks so lonely without his spazers. Plus the spazer would hide the thunder thighs that some of you really dislike
|
|
|
Post by TheMazingerZ on Dec 17, 2013 1:07:32 GMT -5
I think Bandai may do this:
1. First Accessory set - Spacer & Double Spacer (regular release)
2. Second Accessory set - Marine Spacer & Drill Spacer (Tamashii exclusive)
Sort of what they did with the SOC GX-04 initially.
}D
|
|
|
Post by kidomega on Dec 17, 2013 6:48:12 GMT -5
I think Bandai may do this: 1. First Accessory set - Spacer & Double Spacer (regular release) 2. Second Accessory set - Marine Spacer & Drill Spacer (Tamashii exclusive) Sort of what they did with the SOC GX-04 initially. }D i think so too, but they have the molds, they just need to resize them, and then its load and lock, I mean the Drill Spazer kind of fits already, the Marine Spazer can be docked but it needs a joint to lock it into place, and the only problem is the Double Spazer, the nose over arches and extends beyond Grendizer's head. 3D printers are going to revolutionize how we customize our toys. Call me crazy, but there is a project I am working on. Wanna know what it is? You guys can help a lot.
|
|
|
Post by TheMazingerZ on Dec 17, 2013 19:31:50 GMT -5
Are you making the King UFO Grendizer? I'm in! }D
|
|
|
Post by kidomega on Dec 18, 2013 5:28:20 GMT -5
Aha, thats what I wanted to PM you about, but forgot to. I can send you all the pieces from other SRC robots, if you can piece it together. Do we have reference pictures? How about the Cosmo Spazers? They can dock onto the other Spazers as shown in the Mazinger Bible. Have you seen it? Are you up for the Super Submarine? But no, I am planning on building the whole base, as accurate as possible, inside and outside, Thats only one part, but I am going above and beyond to create the whole base, power generator room, etc... I dont know if i should combine and have add ons for Getter Robo, Mazinger Z, Geat Mazinger, Mazinkaiser, Tetsujin 28. I would like it to house all of my Super Robot Army, including Evas, Strike Freedom, Infinite Justice, and Destiny. I will probably dock the rest in a huge hangar beneath the lab, like one of the pictures a poster posted on here. I need to contact this guy from the Philippines. @ 19 mins mark
|
|
|
Post by DUKE 77 on Dec 18, 2013 18:19:41 GMT -5
Photo request: - SRC Grendizer & SRC Megazord together in some dynamic poses, please?
|
|
|
Post by Chen on Dec 18, 2013 19:07:41 GMT -5
I'll post some when I can. I love mixing genres it adds another dimension to photos.
|
|
|
Post by Chen on Dec 18, 2013 20:04:32 GMT -5
|
|
|
Post by DUKE 77 on Dec 19, 2013 14:31:57 GMT -5
I'll post some when I can. I love mixing genres it adds another dimension to photos. YAWWW! That's more than sweet, Chen! Big, big thanks, mate. Beautiful shots and the duo look great together as I thought they would!
|
|
|
Post by Majinga Z on Dec 19, 2013 18:20:36 GMT -5
|
|