|
Post by clayrebel on Sept 20, 2014 10:19:45 GMT -5
Hi Guys,
I know that the GX-31V was very tight (fixed the loose hips/anxles of the original GX-31) but mine is becoming a little loose especially on the neck joint. The hips are a little loose as well, and I don't play with my figures. Is there any ways to tighten the hip joints? (Tried tightening the screws inside the ball joints above thighs, but didn't work)
Also, I know there is a magnetic connector where the neck connects to the body. Any ways to strengthen this area? The head seems to droop behind the body, always making Voltes tilt its head upward.
Any help would be appreciated.
Thanks in advance!
|
|
|
Post by Mr. Ginrai on Sept 24, 2014 12:51:48 GMT -5
Disassemble and coat joints with clear nail polish? Probably better than over tightening the screws, I think you are experiencing wear on the joints which can happen from play or if the joints were just too tight to begin with, they may sometimes wear down more quickly.
|
|
|
Post by clayrebel on Sept 25, 2014 8:38:22 GMT -5
Nail polish remover huh? Wow, I never heard of such creativity. I will give it a shot. Thanks Ginrai!
|
|
|
Post by greengetterguy on Sept 25, 2014 8:47:31 GMT -5
not the remover!!
im sure he meant clear nail paint. not the remover!
|
|
|
Post by clayrebel on Sept 25, 2014 9:12:19 GMT -5
oops, my bad. glad you caught that GGG. thanks so much!
|
|
|
Post by Mr. Ginrai on Sept 25, 2014 11:38:54 GMT -5
Nail polish remover huh? Wow, I never heard of such creativity. I will give it a shot. Thanks Ginrai! No, clear nail polish!!!! Polish lol. Just like I said and GGG said.
|
|