|
Post by - on Aug 21, 2022 10:36:55 GMT -5
ok done deleting everything, this be my last post and I'll give you the honor.
I won't be back
|
|
|
Post by - on Jun 16, 2022 0:32:25 GMT -5
Finally an accurate rendition of Mazinger Z anime! It fires rocket punch and the belly missile too!! I'm excited!!!
|
|
|
Post by - on Mar 5, 2022 19:36:14 GMT -5
thanks for the info fishandchips! I just ordered the last one left 😁
|
|
|
Post by - on Feb 25, 2022 18:35:51 GMT -5
greengetterguy/
It's not a matter of agreeing or disagreeing, I don't care if he hates the Sentinel or not,
he's just spreading false info on things that he has no idea with.
If you don't like the trouble in the board, I recommend you to remove the cause of it.
|
|
|
Post by - on Feb 25, 2022 18:06:53 GMT -5
And keep your rules to yourself, no one needs your opinion about the figures that you don't even own. lets agree to disagree then
you like the Sentinel you think its better fine i wont judge, i like the HW i think its better, wont care about your opinion and im sure i didn't ask for it either
but i guess you are still butthurt from our discussion from years ago, when you called the GX75 garbage, that's why you are trying so hard to defend this sad figure
as i told you i handled both and i liked the HW better, whats the point of all these joints if its going to break, and for that single fact, that the HW is built better made it a winner, so all those tries of sugar coating are a waste of everyone time
going ignore the nonsense you said about the GX45
i dont believe in owning sad figures that could break in two, i dont think i need to own something in order to give an opinion, since somethings are very clear like the picture i posted above
let me tell you something will hurt even you more, people in RJ, in FB and Insta respect my opinion, mainly because i dont sugar coat stuff and i dont defend sad figures like you are doing right now I don't care if you like the HW better or not it's just the matter of your opinion, but the remarks you made about the Sentinel are just plain wrong. HW is no where near the complexity and the finish quality of the Sentinel. It's a simple fact that only you're trying to deny so desperately. And people respect your reviews on things that you don't even have? Good for you
|
|
|
Post by - on Feb 25, 2022 15:41:09 GMT -5
im not going to keep discussing this, since you are using words only a an emotional thinker would use, what you are trying to sell here is a figure with a stupid design flaw and every one should accept this and address it as a greatest figure for the character ? lol okay good luck You're the one telling your feelings about something that you have no experience with, I'm just here to correct your blatantly wrong remarks. GX-45 was thrown into the bargain bins just about everywhere else. The recolors in most cases, are their pathetic attempts to milk out of whatever the failure they had created. You get the reruns for a product that really sells like the Voltron, not the recolors. And keep your rules to yourself, no one needs your opinion about the figures that you don't even own.
|
|
|
Post by - on Feb 25, 2022 4:20:22 GMT -5
you keep having those cute assumptions about my experience and statue them as facts, nothing changed with you huh ? FYI i had the Sentinel on preorder but when i saw the ultimate gimmick of breaking in two i canceled it immediately, crazy right ? i also saw it in person and handled it, didn't like it much so money saved lol the classic "if dont agree on my point then you dont know things", this trick have no effect, so i hate to break it to you but i dont agree and i KNOW things tiny changes but over all they are identical nothing that worth an extra $150 The assumptions came from what you've been saying in this board, remember the remarks you made about the SMP Dancouga? How it is as big as the Sentinel?, and how it does everything SOC does and better? It's not a matter of agree or disagree, you're talking about things that you don't have first hand experience with, and they're just plain WRONG, Same goes to the remarks you made on the Sentinel and Hagane Works, the differences are NOT tiny as they're the defining features of the Sentinel figures in general. The features that people love and would pay the hefty price tag for. I mean seriously, do they look identical to you? If you honestly feel that these two do look all identical, I think you're in a wrong place. I mean why buy SOCs to begin with? You can pick up an Walmart Voltron that looks just as good as the SOC, does everything SOC does, hell, it's even super durable that you can practically throw it around, all at a fraction of the price of SOC!! Here, all for under $100. You don't feel so 'reasonable' now do you? Isn't it pretty obvious who CCS was benchmarking? I certainly don't remember anyone trying to copy that not to mention GX45 was a commercial failure that I found mine in a bargain bin for less than the half of its original price lol Again, if you're looking for that kind of quality, look no further than the Walmart Voltron!! When I say quality, I'm talking about its paint apps, attention to the details, and the engineering that was put into. The Hagane Works is missing all thing that defines the quality of Sentinel.
|
|
|
Post by - on Feb 24, 2022 6:32:25 GMT -5
You are keep making these bold remarks simply because you don't have a first hand experience with the Sentinel. You just have no clue what you're talking about. Just take out your Hagane Works and see if it's anything like the photo you see above. Do they look similar to you? If they do, I seriously doubt you can differentiate your SOCs from something you can pick up at walmart. Before the Sentinel, super robot figures had very limited articulations, mediocre details that only the fans would appreciate. If the Sentinel hadn't pioneered the market with its exceptional details and super high quality finish, also the articulation that would make the gundam model kits run for its money, There would be no CCS Toys, no Pose Plus, no 5Pro. We'd have to just take whatever Bandai throw at us, and be thankful about it.
|
|
|
Post by - on Feb 24, 2022 5:30:10 GMT -5
i wont call it a poor man's Sentinel, i would say its a reasonable man's Sentinel, its not money its value for money
i agree with you that pose didnt work (just tried it), but im not sure if those couple joints should cost an extra $150 ?
the HW is waaay less floppy than the Sentinel
for me when the design is not accurate i stop caring about the scale
It's not just couple more joints It makes a world of difference. You can probably mimic with your Hagane Works, but it's just not nearly as natural and robust as the Sentinel that has now become a new standard of all gokin toys. Not only that, the level of details, and the quality of finish is just another league. And with the newer version coming that fixes all the problems, there's absolutely no reason to buy the HW, unless you're poor.
|
|
|
Post by - on Feb 24, 2022 4:07:57 GMT -5
in the articulation department there is no pose that Riobot can do, but the HW cant
HW Mazinkaiser is nothing more than a poor man's Sentinel. It doesn't have any of the articulation points that made the Sentinel version legendary like the folding in breast plates, calf armor, shoulder blades. Not to mention the size difference which is like SOC vs SRC, I absolutely regret buying it just try this with your Hagane Works lol
|
|
|
Post by - on Feb 20, 2022 15:49:58 GMT -5
|
|
|
Post by - on Jan 1, 2022 0:39:29 GMT -5
This simply is the best looking Daiku Maryu ever, and that's all that matters.
|
|
|
Post by - on Dec 28, 2021 4:49:50 GMT -5
Gaiking looks fantastic
|
|
|
Post by - on Dec 20, 2021 1:07:52 GMT -5
a pass for me
|
|
|
Post by - on Dec 20, 2021 0:59:43 GMT -5
|
|
|
Post by - on Aug 15, 2021 14:35:36 GMT -5
looks like they're going to nail the joints department as all the major joints are diecasts and ratchets at the same time.
it's also nice that it is going to be bottom heavy, which is really needed for a toy of this caliber..
|
|
|
Post by - on Jul 29, 2021 21:34:49 GMT -5
Hagane Works is like half the price, but less than 1/10th in presence
I totally regret buying it
|
|
|
Post by - on Jul 29, 2021 21:32:14 GMT -5
no not the bottom
he has to be on the best viewing height
|
|
|
Post by - on Jul 29, 2021 16:45:27 GMT -5
With a display stand, the weight will be evenly distributed to larger area, so it will be much less likely to break the glass
|
|
|
Post by - on Jul 29, 2021 16:04:58 GMT -5
Preorder done at ShowZStore =)
|
|