|
|
Post by supergetterv on Jan 19, 2011 1:48:03 GMT -5
I also got this one with the SRC Alteisen as they were release at the same time. Bakaryu and ZeroKage is only disappointing if you compare him to the Houraioh and Kurojishi. But since you don't have the other two yet, might I suggest you get Kurojishi, and then Houraioh. That way, each one gets better than the last.
|
|
|
|
Post by nikodiablo on Jan 19, 2011 3:38:51 GMT -5
Incidentally, that exactly is my plan since amiami has ran out of Houraio ;D Will need to source it from HLJ, I guess.
|
|
|
|
Post by chachipower on Jan 19, 2011 19:14:37 GMT -5
going back to the breakage, I will have to verify to make sure, but it seems to put less stress on the breakage area if the tail is in a certain position because it seems near impossible to line up after breakage but moving the tail to a certain position seems to all of a sudden make the pieces line up perfect. Hopefully this will take the fear of transformation away.
|
|
|
|
Post by roanstalker on Jan 23, 2011 18:28:22 GMT -5
Man... what a bummer  I have this on the way along with the SRC Alteisen. Thought I'd start with the most expensive one cause that should be the best, but apparently, that's not the case. I'll need to be really careful, but thanks for letting us know about the product's weaknesses. Good luck with yours. I probably wont transform my new one any more . Oh, and I wish I know more about the show because I have no idea how they all relate to one another... Not much to it. Basically Kurojishi, Houraioh and Bakuryu are housed in the Ellshanc (ship that belongs to the Princess of Lodario). Joe Maya and his friends are caught up in the battle between the Ellshanc and the Zaboom Army. Ellshanc was on the way to Earth to find ninjas to power their robots when they were struck down on Mars. Joe Maya accidentally activates the Kurojishi and becomes one of the protectors of Ellshanc. His friends also become pilots for the other two machines. Whenever one of the Ninja machines start losing power a mysterious robot ninja (nick-named Tobikage or Flying Shadow) appears to help and combines with it. Later Joe Maya gains the ability to fuse with Tobikage and the Kurojishi is passed onto someone else. One of the Princess' guards named Yllbora becomes jealous of Joe getting too 'close' with her and so changes sides and hwelps the Zaboom Army and later fuses with Zerokage to fight against his former allies. Zerokage was originally going to get Ninja machines of his own but that never came to be. |
|
|
|
Post by ancer on Jan 23, 2011 18:44:05 GMT -5
I haven't even messed with my SOC b/c of all these breaks . chachipower , what position should the tail be in to avoid breaking the SOC Thank you |
|
|
|
Post by chachipower on Jan 28, 2011 23:57:29 GMT -5
I haven't even messed with my SOC b/c of all these breaks . chachipower , what position should the tail be in to avoid breaking the SOC Thank you I'll have to check to make sure. I noticed that might have something to do with it because I was trying to line up the two parts to glue them and they wouldnt fit together at all, then I moved the tail and they fit themselves together without stress, then another movement popped it back out and it wouldnt line up. Definetely an oversight in the design! I only know of the other person on this thread that broke his, but they broke EXACTLY the same so it may be a design flaw. I wish I could fix mine it was such a solid figure before the break |
|
|
|
Post by roanstalker on Jan 29, 2011 9:48:55 GMT -5
it was such a solid figure before the break A bit too solid. |
|
