|
|
Post by superelectro on Jun 16, 2015 22:40:26 GMT -5
^Way cool! Nice job, TMZ!
|
|
|
|
Post by TheMazingerZ on Jun 16, 2015 23:02:21 GMT -5
Thanks guys! Doing my best with what I have.  Could be better if I had more knowledge of 3D designing, a better 3D Printer, and way better eyesight.  I know the limbs look white, but they are actually light grey. I'll take a picture of it next to my custom SRC Great Mazinger tomorrow to better see the difference in colors. }D |
|
|
|
Post by TheMazingerZ on Jun 19, 2015 0:30:53 GMT -5
Since my custom SRC Mazinger Z is pretty much done, I started designing a few accessories for it. The first one is:  Battle Beast Dante, from the OVA Mazinger Z vs Ankoku Daishogun. }D |
|
|
|
Post by magengar on Jun 19, 2015 2:19:27 GMT -5
Now you need a doll dressed as a nun to complete the body for that Dante figure! zozo-mag |
|
|
|
Post by B- on Jun 21, 2015 0:09:43 GMT -5
Tmz best part of the maz is you nixed those gay springs on the upper legs those are the worst part of SRCs someday in the future everyone will laugh at those eye sores.
|
|
|
|
Post by TheMazingerZ on Jul 2, 2015 12:10:53 GMT -5
|
|
|
|
Post by magengar on Jul 2, 2015 22:35:08 GMT -5
For as long as I've been in this hobby, I have NEVER seen such a Perfect modified Mazinger-Z action figure as this one! This one screams TOEI from head to toe, wing to wing. It can't get any better than this! Great job, bro!  zozo-mag |
|
|
|
Post by magengar on Jul 2, 2015 22:37:35 GMT -5
With its old Scrander...   }D I want THESE two as wallpapers! Is that the default image size from your camera, or are they larger? zozo-mag |
|
|
|
Post by TheMazingerZ on Jul 2, 2015 22:53:38 GMT -5
They are larger. Where do you want me to send them to? }D |
|
|
|
Post by TheMazingerZ on Jul 2, 2015 22:58:50 GMT -5
For as long as I've been in this hobby, I have NEVER seen such a Perfect modified Mazinger-Z action figure as this one! This one screams TOEI from head to toe, wing to wing. It can't get any better than this! Great job, bro! zozo-mag Thanks bro! It took me a long time, and a lot of headaches, but I think it was worth it. I think there is going to be a tie for the number 1 spot on which is my favorite Mazinger Z figure: this custom SRC, and my custom Mecha Collection Mazinger Z. }D |
|
|
|
Post by magengar on Jul 2, 2015 22:59:36 GMT -5
They are larger. Where do you want me to send them to? }D you can PM them to me and I'll download them from there, or thru FB chat. Thaaaaaanks! zozo-mag |
|
|
|
Post by magengar on Jul 2, 2015 23:03:22 GMT -5
For as long as I've been in this hobby, I have NEVER seen such a Perfect modified Mazinger-Z action figure as this one! This one screams TOEI from head to toe, wing to wing. It can't get any better than this! Great job, bro! zozo-mag Thanks bro! It took me a long time, and a lot of headaches, but I think it was worth it. I think there is going to be a tie for the number 1 spot on which is my favorite Mazinger Z figure: this custom SRC, and my custom Mecha Collection Mazinger Z. }D They're both awesome in their respective toyline/category, and I like 'em both. But your SRC Maz, being a chogokin, just Cannot be denied 1st Place, all hands Down! zozo-mag |
|
|
|
Post by TheMazingerZ on Jul 12, 2015 20:59:04 GMT -5
 with the sketch filter...  }D |
|
|
|
Post by magengar on Jul 12, 2015 21:25:09 GMT -5
SchwEEt! And you had even made Dante's boomerang ring, too! zozo-mag |
|
|
|
Post by TheMazingerZ on Jul 31, 2015 20:15:58 GMT -5
Amazing things come out of SLA printers...  Can you see the size compared to the LEDs? This is how it came out. No trimming, sanding, cutting. Of course, getting the uncured resin off from it after it was printed, was NOT a fun task. }D |
|
|
|
Post by gravewolf on Jul 31, 2015 23:51:12 GMT -5
Awesome!! That would not have been possible with our older printers. Getting rid of the gunk is a lot more preferable than sanding.
|
|
|
|
Post by magengar on Aug 1, 2015 4:59:02 GMT -5
Smoothing that little Pilder's surface is gonna be a micro-pain in the buttungus. zozo-mag |
|
|
|
Post by TheMazingerZ on Aug 1, 2015 10:31:50 GMT -5
No need to smooth, as it is smooth already. The lines you see are due to the light going throught the clear resin. }D |
|
|
|
Post by TheMazingerZ on Aug 5, 2015 9:09:10 GMT -5
While I'm waiting for some India ink to arrive, I used some old fine point Sharpies to try to give the tiny open canopy Jet Pileder some color. Turns out even these fine point pens were way too big to do a good job. Oh well, at least a little bit more detail can be seen... like Koji!  }D |
|
|
|
Post by magengar on Aug 6, 2015 7:48:14 GMT -5
Now that Pilder looks Photoshopped with watercolor markers. So... what's with that printed Maz head, that figure it's on looks like the MechaCollection Maz model kit. zozo-mag |
|
