|
Post by TheMazingerZ on Jun 27, 2015 1:41:01 GMT -5
I would suggest to them tgat they should just include a fixed posed Gashapon sized/style figure to stick inside the dragon if more accuracy is wanted. Owners can still use the regular sized Getter inside the dragon if they wish, but a cheap option like the mini Getter would be most welcome. }D
|
|
|
Post by reVolVer on Jun 27, 2015 4:34:54 GMT -5
Well.. this puts a damper on things. Then again, at 25" long I don't know if the average collector can have more space for anything larger. Gold yup. I think ET used thier common sense in making Shin dragon knowing the dragon at same proportion with the anime will take a lot of space and definitely cost a lot of money to buy. maybe few very RICH collectors can afford it but it will not be profitable for the company unlike if it will be sold at reacheable price. Think of the dragon as a bonus add-on and the main focus was actually the robot itself.
|
|
|
Post by reVolVer on Jun 27, 2015 6:34:32 GMT -5
I would suggest to them tgat they should just include a fixed posed Gashapon sized/style figure to stick inside the dragon if more accuracy is wanted. Owners can still use the regular sized Getter inside the dragon if they wish, but a cheap option like the mini Getter would be most welcome. }D i know what u mean. i kinda imagine it like a GX-05 Daikyu Maryu Gaiking (with a small Gaiking combined) displayed together with a GX-27 Gaiking. actually a nice idea. i hope sum1 from miracle will consider.
|
|
|
Post by chogokinsnake on Jun 27, 2015 8:56:46 GMT -5
|
|
|
Post by reVolVer on Jun 27, 2015 9:19:35 GMT -5
well... the toy looks closer now.
|
|
|
Post by S_Gokin on Jun 27, 2015 9:44:04 GMT -5
even if it wasnt %100 accurate its good to see other Getters been made other than Getter Robo and Getter Dragon
|
|
|
Post by GTMQ8 on Jun 27, 2015 15:55:47 GMT -5
They keep bringing out some weird releases. I love the design of Shin Dragon from the OVA but this looks ridiculous. The scale is all wrong. If Bandai made this for SOC line you can be sure at least the scale would be more accurate.
|
|
|
Post by B- on Jun 27, 2015 16:45:49 GMT -5
I like it a lot at least it's not another pot belly getter so sick of that same figure done to death.
|
|
|
Post by B- on Jun 27, 2015 16:47:34 GMT -5
They keep bringing out some weird releases. I love the design of Shin Dragon from the OVA but this looks ridiculous. The scale is all wrong. If Bandai made this for SOC line you can be sure at least the scale would be more accurate. firat off bandai would never do this figure it's too obscure they will do another ten pot bellies before this...ughh
|
|
|
Post by GTMQ8 on Jun 27, 2015 20:58:46 GMT -5
They keep bringing out some weird releases. I love the design of Shin Dragon from the OVA but this looks ridiculous. The scale is all wrong. If Bandai made this for SOC line you can be sure at least the scale would be more accurate. firat off bandai would never do this figure it's too obscure they will do another ten pot bellies before this...ughh You never know what Bandai will do. Also the pot belly Getters lol that is so true we have so many of them now.
|
|
|
Post by miracle on Jun 27, 2015 23:28:31 GMT -5
Hello Everyone
Long time no see and happy to be here again.
hope you guys like our new coming project. as this is still in a very early stage. I cant say too much. one thing we want to say is , we only make licensed products.
our team heard your suggestions. which we comes up some new ideas.
We will have some new products news going to release in coming HK ACG festival.
Thanks once again for your support.
|
|
|
Post by Gold on Jun 28, 2015 0:27:28 GMT -5
Glad to hear this thing is going to be licensed. I was worried it would fall under 3rd party product. Thanks for clearing things up. Back to the toy itself, I wonder if the whole Shin Dragon would work better if the dragon was an inflatable balloon? Sort of like the old Ninja Turtles - The Turtle Blimp vehicle and/or that inflatable Octopus balloon that came with Bandai's Chogokin One Piece Going Merry pirate ship. That would drastically cut cost, lower the final price and we'd get (more likely) a properly scaled Dragon for Getter to ride on. Sadly the drawback would be it look kinda cheap thanks to the obvious vinyl finish. But I think I'd still go for it if they did it like that. Gold
|
|
|
Post by greengetterguy on Jun 28, 2015 1:11:08 GMT -5
this is a very rare opportunity where we can talk to the company representative directly and i appreciate that very much.
i love these cool getters youre working on.
please keep the proportion, sculpt and colors source screen accurate as possible. please please make the feet Die-cast and keep pvc material to minimal if at all....
|
|
|
Post by S_Gokin on Jun 28, 2015 8:39:01 GMT -5
new products ? i hope bismarck
|
|
|
Post by B- on Jun 28, 2015 11:32:14 GMT -5
new products ? i hope bismarck this we agree on!! Gold inflatable would just be too big for most collectors space I like the small dragon it serves a purpose
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 28, 2015 11:41:33 GMT -5
Glad to hear this thing is going to be licensed. I was worried it would fall under 3rd party product. Thanks for clearing things up. Back to the toy itself, I wonder if the whole Shin Dragon would work better if the dragon was an inflatable balloon? Sort of like the old Ninja Turtles - The Turtle Blimp vehicle and/or that inflatable Octopus balloon that came with Bandai's Chogokin One Piece Going Merry pirate ship. That would drastically cut cost, lower the final price and we'd get (more likely) a properly scaled Dragon for Getter to ride on. Sadly the drawback would be it look kinda cheap thanks to the obvious vinyl finish. But I think I'd still go for it if they did it like that. Gold HELL NO! Inflatable toys get to deflate over time, and if you over inflate it you will rip a seam. The same goes if the inflatable toy is not folded and stored properly.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 28, 2015 11:42:32 GMT -5
Hello Everyone Long time no see and happy to be here again. hope you guys like our new coming project. as this is still in a very early stage. I cant say too much. one thing we want to say is , we only make licensed products. our team heard your suggestions. which we comes up some new ideas. We will have some new products news going to release in coming HK ACG festival. Thanks once again for your support. Awesome news!
|
|
|
Post by Mechanical Flesh on Jun 28, 2015 11:49:16 GMT -5
Well, the main body of the dragon is just a tad smaller than it should be, compared to the getter upper half. The thing I really, really don't like is how short it is. The neck and the tail of the dragon should be quite a lot longer, this figure's body is just too compressed length-wise I like the concept, but if they end up releasing it like this.. I think I'll keep the dragon part in the box, and I'll display it in manga form, biped human-like shape. Getter Ark looks sleek. I'm not familiar with that mecha yet, but the figure has presence. Looking good, Miracle.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 28, 2015 12:04:39 GMT -5
I do not know if this is financially possible, but my recommendation to Miracle will be to offer optional neck and tail extension parts. So the dragon will look less compressed. And the buyer will have the option to add/remove those extension parts depending on shelf space.
|
|
|
Post by greengetterguy on Jun 28, 2015 12:28:51 GMT -5
and an optional tiny getter too! so i can display tiny getter rider version.
ditto on the compressed looking dragon.
|
|