|
|
Post by alan092177 on Apr 14, 2019 7:31:38 GMT -5
any of you experienced bits and pieces of the Getter Vol. 1 suddenly shearing off for no apparent reason? one of the ball joint on Getter 1's cape suddenly snapped. couldn't remedy it with super glue. while it doesn't affect anything, it just made me extra cautious, and jiffy about the whole product range in general. and i've already pre-ordered the remaining sets.
|
|
|
|
Post by blitzkriegomega on Apr 14, 2019 9:16:09 GMT -5
any of you experienced bits and pieces of the Getter Vol. 1 suddenly shearing off for no apparent reason? one of the ball joint on Getter 1's cape suddenly snapped. couldn't remedy it with super glue. while it doesn't affect anything, it just made me extra cautious, and jiffy about the whole product range in general. and i've already pre-ordered the remaining sets. Getter 2's neck. mine broke at the ball-joint as the peg holding it up was WAY too thin. that should have just been a peg. I was able to make an alternate fix with some plastic cement (Melts the plastic together) and superglue (Glued behind the part for extra support). I'll keep Getter 1's cape in mind since I need to disassemble the kits to paint them.     also I accidentally created unintended articulation by shaving down the inside of Getter 2's face-piece ever so slightly. it now rotates! I would also be careful of getter 2's lower legs. do not disassemble them. the parts are too tightly connected and something WILL break. you're intending to paint the kit, paint the joint BEFORE you assemble the lower leg. Getter 1 and Getter 3 are fine on my product. aside from a loose ball-joint on Getter 3's shoulder, but I chalk that up to a fluke, as I checked the parts and nothing's broken there. |
|
|
|
Post by blitzkriegomega on Apr 17, 2019 15:28:55 GMT -5
I know this is gonna be a weird ask, but could someone here place the Minipla Getter 1 next to a few of the Getter Revoltechs? Primarily Getter Go and New Getter 1?
I'm trying to see if the Minipla scale at all with the Revoltechs, of if they're just too small.
|
|
|
|
Post by bluetengu on Apr 25, 2019 1:45:19 GMT -5
Votoms enters the MiniPla line up.  |
|
|
|
Post by bluetengu on Jun 11, 2019 1:32:01 GMT -5
|
|
|
|
Post by S_Gokin on Jun 11, 2019 20:08:14 GMT -5
thanks for sharing man
i really dont see how this will be better that the GX13R
|
|
|
|
Post by bluetengu on Jun 12, 2019 4:27:44 GMT -5
thanks for sharing man i really dont see how this will be better that the GX13R I don't think we can ever think of it being better, but it will be cheaper and smaller - which are good points for some. |
|
|
|
Post by reVolVer on Jun 13, 2019 4:19:57 GMT -5
thanks for sharing man i really dont see how this will be better that the GX13R I don't think we can ever think of it being better, but it will be cheaper and smaller - which are good points for some. yes. If im not deep into SOCs and only now starting to collect super robots.. i would choose these over SOCs. Almost same transformation.. ofcourse waay cheaper.. and will save a lot of space for me. plus they got those missing in SOCs in thier lineup. |
|
|
|
Post by GetterBoi on Jun 17, 2019 13:14:13 GMT -5
I've enjoyed building these model kits. They are rather sticker heavy though, if you don't paint them.
|
|
|
|
Post by wartaker on Jun 18, 2019 10:23:39 GMT -5
Come with 3 Eagles. No transform.
|
|
|
|
Post by S_Gokin on Jun 18, 2019 11:11:29 GMT -5
$79 and an extra $28 for the optional part set ?
ok good luck guys im out
|
|
|
|
Post by supergetterv on Jun 19, 2019 11:29:04 GMT -5
|
|
|
|
Post by blitzkriegomega on Jun 26, 2019 22:15:57 GMT -5
Speaking of, I fixed my Getter 1's hips and painted up Shin Getter 1. now I gotta wait til I can buy a second copy of Vol. 2 to build Dragon and both Black Getters.  and as to not clog this thread, I put all of my Minipla Getter Vol. 1 stuff here: imgur.com/a/TGALjrT |
|
|
|
Post by S_Gokin on Jul 28, 2019 12:03:21 GMT -5
not %100 sure, but looks like Combattler V will be in this line as well ?
can some one confirm this ?
|
|
|
|
Post by cmal on Jul 29, 2019 7:37:04 GMT -5
I'd like it if they'd just release the damn FA already.
|
|
|
|
Post by bluetengu on Jul 30, 2019 0:44:22 GMT -5
not %100 sure, but looks like Combattler V will be in this line as well ?
can some one confirm this ?
Confirmed Bandai Super Mini-Pla series addition. This along with a crowd of Votoms shown at Wonderfest Summer. I'm excited for this one. |
|
|
|
Post by S_Gokin on Jul 30, 2019 2:03:15 GMT -5
I'd like it if they'd just release the damn FA already.
my guessing is late this year or early 2020
|
|
|
|
Post by GetterBoi on Aug 1, 2019 18:55:01 GMT -5
Wow, this line is non-stop releases. Baikanfu. Possibly P-Bandai only. Slated for Spring 2020. |
|
|
|
Post by blitzkriegomega on Aug 1, 2019 23:40:08 GMT -5
frankly, I would have expected a Moderoid before a Minipla of this kit...
|
|
|
|
Post by reVolVer on Aug 2, 2019 6:47:03 GMT -5
Wow, this line is non-stop releases. Baikanfu. Possibly P-Bandai only. Slated for Spring 2020. cool upcoming products. this line has potential. If im gonna interpret this.. Bandai's sort of slowing down the SOC line with some of thier underwhelming releases lately(except for the upcoming Dairugger ofcourse)..and focus on the explosion of popular characters in the Bandai Minipla (plus the super robots in HG line). Its a welcome news really... if they are going to reach to other fanbase who cant afford the hobby or have other important priorities and does not want to spend too much money for it. |
|
