|
|
Post by moleman on May 13, 2017 16:35:52 GMT -5
The 00Q does fit quite seamlessly with the official Bandai MBs...it's a little scary LOL. If it's good enough I might even skip the Bandai one since preorders for metal builds are such a pain to get now.
|
|
|
|
Post by goldorak on May 16, 2017 4:05:41 GMT -5
|
|
|
|
Post by keith0 on May 16, 2017 6:42:22 GMT -5
Got this guy and think he's great - the joints are all stiff and it has a nice heft to it despite its size. I don't own any Metal Builds and so can't compare the quality to one of those, but to me it seems very good quality for the money. goldorak Out of interest does your crotch armour (cod piece?!) move up and down with leg movement like it does in that earlier gif? Mine is either frozen or it does not have that function  |
|
|
|
Post by moleman on May 16, 2017 16:21:43 GMT -5
I broke down and bought bababoo's last one on ebay. I can't wait to have all of Setsuna's suits from gundam 00.
|
|
|
|
Post by f360 on May 16, 2017 16:30:03 GMT -5
I broke down and bought bababoo's last one on ebay. I can't wait to have all of Setsuna's suits from gundam 00. Nice , He use EMS shipping too , so youll most likely recieve it 7 days from the date you ordered. |
|
|
|
Post by f360 on May 16, 2017 16:33:33 GMT -5
Got this guy and think he's great - the joints are all stiff and it has a nice heft to it despite its size. I don't own any Metal Builds and so can't compare the quality to one of those, but to me it seems very good quality for the money. goldorak Out of interest does your crotch armour (cod piece?!) move up and down with leg movement like it does in that earlier gif? Mine is either frozen or it does not have that function You need to move it all the way up before the crotch piece will slide up. Close to 90 degrees up. |
|
|
|
Post by moleman on May 16, 2017 21:01:01 GMT -5
I broke down and bought bababoo's last one on ebay. I can't wait to have all of Setsuna's suits from gundam 00. Nice , He use EMS shipping too , so youll most likely recieve it 7 days from the date you ordered. Sounds good! I hope to see that tracking number in the next few days.  |
|
|
|
Post by keith0 on May 20, 2017 1:31:43 GMT -5
Got this guy and think he's great - the joints are all stiff and it has a nice heft to it despite its size. I don't own any Metal Builds and so can't compare the quality to one of those, but to me it seems very good quality for the money. goldorak Out of interest does your crotch armour (cod piece?!) move up and down with leg movement like it does in that earlier gif? Mine is either frozen or it does not have that function You need to move it all the way up before the crotch piece will slide up. Close to 90 degrees up. Yeah,I have had a good play with the top of the leg joints and can't get them to bend past 90 degrees. Think the crotch armour mechanism is frozen on my unit. Oh well, it is a KO of suppose. |
|
|
|
Post by jakcrow on Jun 6, 2017 16:15:54 GMT -5
I have both the "Fanmade" and MoShow 00q figures. It's interesting to see slightly different takes on the unit.
The Fanmade 00q is the equivalent of a MG kit, while it appears to be made of good quality parts, the joins are a bit loose and some parts are easily knocked off. It has a really interesting LED assembly with an innovative way of powering both the chest and head LEDs, and it comes with the giant sword that's been seen with the Exia Avalanche. It also has some interesting configuration options for the shield bits and buster sword.
I have several Metal Build figures like the Red, Blue, and Gold Frames, Exia Repair III, Freedom, and Destiny, and the MoShow 00q can easily stand with Bandai's Metal Build kits IMO. It's rock solid with tight joints, and a lot of additional surface details. It also has a LED setup for the chest and head. It's superior to the Fanmade figure in almost every way while only costing little more than it from most places.
|
|
|
|
Post by kid on Jun 6, 2017 21:06:34 GMT -5
which 00 is better? fan made or mo show
|
|
|
|
Post by f360 on Jun 6, 2017 21:20:46 GMT -5
which 00 is better? fan made or mo show Moshow is much better |
|
|
|
Post by jakcrow on Jun 9, 2017 14:16:28 GMT -5
Here's some photos of the Fanmade figure. Again, the best description I can give of it is that it's the metal equivalent of the MG 00q. It's got some slightly better details than the MG model, some of the joints are a little loose, and some parts tend to pop off when you're posing it, but it's super posable and it comes with some nice accessories, so in general, it's okay. I wouldn't pay more than $80US for it, since the MoShow version is completely superior to it. I can post some comparisons between the figures two later. Correction. The photos I posted stopped working. I'll find a better option.
|
|
|
|
Post by KumaStyle.com (TJ) on Sept 6, 2017 9:43:44 GMT -5
which 00 is better? fan made or mo show Moshow is much better Why is it better? |
|
|
|
Post by innorous on Sept 6, 2017 18:47:30 GMT -5
|
|
|
|
Post by KumaStyle.com (TJ) on Sept 6, 2017 18:55:17 GMT -5
It does! Thanks abd checking the links out now.
|
|
|
|
Post by f360 on Sept 6, 2017 20:59:11 GMT -5
Pretty much everything. Clearner paint Better proportioned figure. Better joints And especially the quality control. Even though moshows qc got downgraded a bit from their Strike gundam, its still ton better than fanmade. Fanmade has many random QC issues, missing saber parts, missing pieces, loose joints, cracked joints right out of the box, broken ankle, broken chest fins, etc. not all at once , just randomly, but mostly loose joints. Heres a link with many photos www.dachong.gz.cn/read.php?tid-88508.html |
|
|
|
Post by zrli5027 on Sept 6, 2017 21:46:53 GMT -5
The only good thing about fanmade 00q, is the buster sword, which works perfectly with MB avalanche exia.
|
|
|
|
Post by KumaStyle.com (TJ) on Sept 6, 2017 22:18:27 GMT -5
Looks like both the moshow and fanmade are en route so let's have some fun.
|
|
|
|
Post by leeboo1211 on Sept 7, 2017 2:47:13 GMT -5
The only good thing about fanmade 00q, is the buster sword, which works perfectly with MB avalanche exia. lol I thought about getting it primarily for that, haha. But I'll make do with the model kit conversion set. |
|
|
|
Post by KumaStyle.com (TJ) on Sept 7, 2017 8:35:25 GMT -5
It looks like the fanmade also comes with a back clip for Avalanche? Hope it's the actual, opposite side.
|
|
