|
Post by S_Gokin on Nov 24, 2018 6:34:10 GMT -5
when you put all the 3 sets together you end up with a massive display that take alot of space
i had a hard time photographing them together, actually i think this is the best way to display them (out of 3 poses)
also i went on creative mode and did this
change Getter 2 switch on LOL
|
|
|
Post by rx79msg on Nov 24, 2018 8:14:43 GMT -5
Is it this set that don't fit Detolf? Or was it with the Spazer only? I couldn’t get it to fit in a detolf cabinet. So I sold the second spazer set and just display Grendizer and his main spazer. I do not like his stand at all so I don’t use any part of it.
|
|
|
Post by Actarus on Nov 24, 2018 17:04:37 GMT -5
It seems it would fit. Must be very close of fitting in.
|
|
|
Post by Actarus on Nov 24, 2018 17:05:55 GMT -5
Can you adjust a bit the "skate" of the marine spazer or the drill spazer, so it would fit
|
|
|
Post by S_Gokin on Nov 26, 2018 8:02:04 GMT -5
Can you adjust a bit the "skate" of the marine spazer or the drill spazer, so it would fit
yes you can but it wont look as good tho
|
|
|
Post by Actarus on Nov 26, 2018 11:22:59 GMT -5
But if it don't fit and you don't display no one can see it.
|
|
|
Post by rx79msg on Nov 27, 2018 4:32:13 GMT -5
My issue with the stand was the overall length of the completed stand. Maybe I was doing it wrong but I couldn’t get the detolf cabinet door to close all the way.
|
|
|
Post by Actarus on Nov 27, 2018 11:01:18 GMT -5
Can you use a certain angle to make it fit?
|
|
|
Post by rx79msg on Nov 27, 2018 11:12:37 GMT -5
Can you use a certain angle to make it fit? I didn’t try that but I can’t now because everything is packed up for my move. LOL
|
|
|
Post by Coletron on Nov 28, 2018 23:15:49 GMT -5
S_Gokin that's quite a sight!
|
|
|
Post by wartaker on Nov 29, 2018 0:40:55 GMT -5
OK.. Where is my SRC version?
|
|
|
Post by S_Gokin on Nov 30, 2018 10:15:00 GMT -5
OK.. Where is my SRC version?
got axed long ago lol
tho i would welcome an SRC set that include all of the 3 Spazers with effect parts and TFO
|
|
|
Post by S_Gokin on Dec 1, 2018 14:49:27 GMT -5
who else think the rare end of the Spazer looks like a nerd wearing a huge glasses lol
|
|
|
Post by Coletron on Dec 1, 2018 19:08:49 GMT -5
Bro, if you're robots are staring back - it's time to get out of the house....
|
|
|
Post by S_Gokin on Dec 2, 2018 13:36:40 GMT -5
Bro, if you're robots are staring back - it's time to get out of the house.... lol they passed that level long ago
now we have full conversations
|
|
|
Post by Coletron on Dec 3, 2018 18:56:05 GMT -5
Bro, if you're robots are staring back - it's time to get out of the house.... lol they passed that level long ago
now we have full conversations And I thought I was the only crazy person on the board.
|
|
|
Post by greengetterguy on Dec 3, 2018 19:34:56 GMT -5
Hah, you KNOW I ain’t right....
|
|
|
Post by S_Gokin on Dec 27, 2018 8:06:18 GMT -5
Hello guys, here is some my photos for the GX-76 and it sets (GX-76X and GX-76X2) its going to be a long post lol enjoy
|
|
|
Post by bocasas on Dec 27, 2018 10:49:41 GMT -5
Great pics s_gokin. Seems not only you like the figure but you have some love for the show too This is the only DC I would probably get, (I have the old releases and I'm cool with them). The only weak point is the drill spacer, I think the older one looked way better. But is a great figure and one of my favourite robots.
|
|
|
Post by greengetterguy on Dec 27, 2018 11:55:34 GMT -5
Guys Dont forget DX Grendizer. Isn't it due to land on 2019?
|
|