|
Post by metharan on Mar 13, 2005 2:38:11 GMT -5
hi guys! new to the board ;D
I am assembling the mg freedom, and found that the shoulder part is quite loose after i've assembled it....do u guys have the same problem? i'm quite sure i've inserted the arm all the way, but still don't know whats the problem with the looseness....is there anyway to fix this?
thank you!
|
|
|
Post by metharan on Mar 17, 2005 9:50:57 GMT -5
anyone??
|
|
|
Post by ataru on Mar 17, 2005 14:41:45 GMT -5
I don't have that model, but assuming it's a ball joint in a polycap, you could always try thickening the ball with super glue or nail polish. It can be very effective.
|
|
|
Post by skybluelinen on Mar 18, 2005 8:39:17 GMT -5
heyy. i am currently assembling the same model. when i get to the shoulder, i'll answer. but i was wondering, are your two E trees kind of a dark navy blue instead of black?
|
|
|
Post by metharan on Mar 20, 2005 2:25:15 GMT -5
yea, they are...i thought the were black as well first, but when u look at the box art, it does kinda look like navy bluish instead of black so i guess its alright
|
|
|
Post by purplehaze on Mar 21, 2005 17:07:06 GMT -5
ya the shoulders are pretty loose but the only thing that pisses me off are the wings which come off all the time
|
|
|
Post by jwm on Mar 21, 2005 18:54:40 GMT -5
Which joint on the shoulder is too loose? If it's a ball (or peg) and polycap socket, then give the ball a coating of super glue, let it dry and try it again. Repeat until the joint is firm. If it's a peg and hole joint you can make a shim by threading a strip of plastic bag through the hole. Trim away excess. Hope this helps. JWM
|
|