|
Post by locidm on Mar 26, 2011 2:04:23 GMT -5
Does anybody know where to buy screws to replace worn ones in a Studio Half Eye model? Some of the screws in my perfect change getter and compact perfect change shin getter is worn.
The Shin Getter manual does give the dimensions of the different screws to use, and they range from 1.7 mm x 4 mm to 2 mm x 15mm.
I'm in the US San Francisco bay area. Any help would be appreciated.
|
|
|
Post by theman on Mar 28, 2011 20:46:25 GMT -5
If you take the screws to any neighborhood hardware store, they will be able to replace them. Only problem is that the screws are metal, and the toy is composite, so it's probably the threading in the toy, can you post pictures?
|
|
|
Post by locidm on Mar 28, 2011 22:38:49 GMT -5
I'm thinking about going to Ace Hardware but haven't found the time. I got mine used and the previous owner cranked a few screws a little too hard and the Philips head is washed. For those screws replacement should fix the issue.
I'm sure there are places where the threads are going bad too but I'm not going to mess with those at the moment.
|
|