|
Post by OJA on Sept 26, 2005 21:21:04 GMT -5
If they come up with GX-30 Voltes V with less than 10% diecast, would you still get it? (I will )
|
|
|
Post by REX-203 on Sept 26, 2005 21:40:35 GMT -5
Needless to say, I'd be disappointed. But I'd still get it. But again, I'd be VERY disappointed.
|
|
|
Post by andrewdsz on Sept 26, 2005 22:36:05 GMT -5
I will say F-*-*-* U Bandai 1000000000 times but still gettin it... ...
|
|
|
Post by Chen on Sept 27, 2005 6:29:41 GMT -5
if it only had 10% diecast, well I'd get it only because it's in scale with GX-03 and because it's the only one on the market. But after that Bandai would have to come out with a killer SOC or it may start losing ground to the newer Gokin Lines.
|
|
|
Post by lancerx on Sept 27, 2005 8:59:22 GMT -5
Of course not, well for $15, meybe.
|
|
|
Post by 00silvergt on Sept 27, 2005 11:54:25 GMT -5
If VV5 was 10% diecast, I guess it would all depend on which parts are diecast, if it is the joints, etc only then in my opinion this is not a classic SOC, but a plastic model or plastic toy. No I wouldn't get it and pay $200 each for it!
|
|
|
Post by mazfan on Sept 27, 2005 16:58:27 GMT -5
Yes, I'd get it because I am a slave to the SOC line. Heck, just as long as I have my mostly metal SOC Mazinger Z's, I am happy (I am one of those unusual Filipinos who is a bigger Mazinger fan than Voltes).
|
|
|
Post by Orbitron on Sept 27, 2005 17:22:30 GMT -5
I will say !@#$%^&*()_+!!! But I will still get it. ;D
|
|
|
Post by mechapunk on Sept 27, 2005 22:12:22 GMT -5
That's unthinkable! and what is more UNTHINKABLE is, i would still get it. such servitude!
|
|
|
Post by Steve Armstrong on Sept 27, 2005 22:18:55 GMT -5
I will still get it regardless..:-)but disapponted of course...
|
|
|
Post by Byakero69 on Sept 28, 2005 0:41:41 GMT -5
there will be CHAOS!!!!!!!!!!!!! ;D ;D ;D ;D
|
|
|
Post by mannyD on Sept 29, 2005 9:39:02 GMT -5
yep, i would still get it. zambot 3 has minimal diecast, but i'm still awed by it's design and overall quality and finish, nevertheless. if they would really do, they should make the plastic parts of voltesV in quality finish (just like zambot's).
|
|
|
Post by 00silvergt on Sept 29, 2005 12:28:09 GMT -5
Ah, yes, but would you pay $200 for it? BTW, I think even Zambot was more than 10% diecast.
|
|
|
Post by Chen on Sept 29, 2005 12:40:36 GMT -5
Zambot actually has quite a bit of diecast even Zambo Ace is close too 30-40% diecast.
|
|
|
Post by 00silvergt on Sept 29, 2005 12:56:21 GMT -5
to change up the topic a bit, using what we know of Bandai and the toy trends and what overall makes sense...nevermind throw all the out. Which do you think will actually be diecast. Ofcourse it can't be all diecast, cost and practicality will play a role.
My guess: Chest, shoulders, lower legs, feet.
|
|
|
Post by mannyD on Sept 29, 2005 23:30:19 GMT -5
Ah, yes, but would you pay $200 for it? BTW, I think even Zambot was more than 10% diecast. yeeep, i would probably still. zambot may have more than 10% diecast, but that's not where i'm going at ;D. It's the quality of plastic i'm refering to ;D. anyways, voltesV is voltesV, we filipinos love im. em sure am going to get im, eh, "what if 10% diecast or not" ;D.
|
|
|
Post by lawlacan on Sept 30, 2005 0:43:43 GMT -5
Of course I will buy him!!
|
|