|
Post by Mechadevil on Oct 2, 2006 20:12:29 GMT -5
Does anyone find it impossible to keep the devil wings in their max factory diecast black Devil Wing Version Shin Getter 1 chogokin? It drives me nuts, right now I have triple wrapped masking tape i cut for it, but now that sh!ts gonna be sticky: ( show me your Tips!
|
|
|
Post by mayita on Oct 2, 2006 22:41:13 GMT -5
Does anyone find it impossible to keep the devil wings in their max factory diecast black Devil Wing Version Shin Getter 1 chogokin? It drives me nuts, right now I have triple wrapped masking tape i cut for it, but now that sh!ts gonna be sticky: ( show me your Tips! I think u meant aoshima devil wing version shin getter , i know it is a pain i have the same problem with the new wing version
|
|
|
Post by joydivision on Oct 3, 2006 4:52:44 GMT -5
i remember thinking the same ("ohh boy!") when i bought mine! i did that some years ago but if you insert it correctly you will have no problem. mine is even posed slightly bent backwards looking at the sky and the wings stay in their place.
|
|
|
Post by Omni Existence on Oct 3, 2006 6:06:09 GMT -5
Mine's fine. Have had it for about 3 or 4 years now. Still looks bad@ss as ever. Me thinks there's a lemon in every basket of Devil Wing Shin Getters. Usually, it's a bad fit between the male and female pegs. You can try thickening the male peg by dabbing some glue on it. Let the glue dry up before inserting it on the female peg.
|
|
|
Post by robwhit1 on Oct 3, 2006 13:24:32 GMT -5
I haven't had any problem with the devil wing but I have had problems with the new closed wing.
|
|
|
Post by GDomino on Oct 5, 2006 4:51:00 GMT -5
Mine's fine. Have had it for about 3 or 4 years now. Still looks bad@ss as ever. Me thinks there's a lemon in every basket of Devil Wing Shin Getters. Usually, it's a bad fit between the male and female pegs. You can try thickening the male peg by dabbing some glue on it. Let the glue dry up before inserting it on the female peg. Or put layers of clear neail polish to thicken up the peg... you can always peel away at the nail polish later if you want to.
|
|
za4c1
Junior Robot
Posts: 32
|
Post by za4c1 on Oct 5, 2006 15:45:03 GMT -5
no problems with the devil wings
|
|
|
Post by Lord Zarak on Oct 5, 2006 16:07:06 GMT -5
i have 2.. no problems
|
|
|
Post by Mechadevil on Oct 5, 2006 22:28:28 GMT -5
thanx dudes.
|
|
|
Post by 00silvergt on Oct 5, 2006 23:23:56 GMT -5
Nail polish as the man said or modelling putty and some black paint for something more permanent, yet not so sticky.
|
|
|
Post by dme3o on Oct 5, 2006 23:30:14 GMT -5
woa...he's back!
|
|
|
Post by Omni Existence on Oct 6, 2006 6:48:30 GMT -5
Mine's fine. Have had it for about 3 or 4 years now. Still looks bad@ss as ever. Me thinks there's a lemon in every basket of Devil Wing Shin Getters. Usually, it's a bad fit between the male and female pegs. You can try thickening the male peg by dabbing some glue on it. Let the glue dry up before inserting it on the female peg. Or put layers of clear neail polish to thicken up the peg... you can always peel away at the nail polish later if you want to. I wanted to try the good 'ol Nail Polish fix, but the female pegs where the wings go are made of what looks like 'softer-porous plastic' compared to the one used on the wings. I didn't want to risk getting nailpolish in there. Might ruin the plastic.
|
|
|
Post by Lord Zarak on Oct 11, 2006 7:49:07 GMT -5
a problem i sow in my shin getter DW is that the axe had the post connection with the cutting part very large and the cutting part rotated when i change my soc position...
|
|
|
Post by boogeyman on Oct 11, 2006 13:14:44 GMT -5
mine is ok man.I'm sorry for yours
|
|