|
|
Post by KumaStyle.com (TJ) on Sept 14, 2016 19:15:03 GMT -5
|
|
|
|
Post by KumaStyle.com (TJ) on Sept 20, 2016 19:35:53 GMT -5
|
|
|
|
Post by coldiron on Sept 21, 2016 12:30:05 GMT -5
So it's not possible to swap torsos
|
|
|
|
Post by Yumcha on Oct 6, 2016 21:11:00 GMT -5
Planet X's Apocalypse...no, not the X-Men villain.   |
|
|
|
Post by nikodiablo on Dec 3, 2016 0:56:04 GMT -5
The wife bought me this for my birthday and I love it!
Good quality plastics and build quality, true to the source material, all three modes, and fantastic poseability. Makes me think of getting their 6Shot.
|
|
|
|
Post by rx79msg on Dec 6, 2016 10:57:14 GMT -5
That's cool. I was thinking about getting Lord Scorpion. But I am waiting to see how it scales with Transformers Titans Return figures. I was hoping to see a Scorponok that scaled nicely with Toyworld Infinorator but I am losing hope I will see that or Toyworld doing a Scorponok! LOL
|
|
|
|
Post by supergetterv on Dec 7, 2016 3:51:37 GMT -5
GenerationToy J4ZZ. I love the look. There's just something about the aesthetic that I find attractive from this designer. Just can't put my finger on it. Been looking forward to this one since I first saw the prototype. I Picked it up at the toy show over the weekend in San Jose from Toy Arena. Here's a quick mini review.  I really like the vehicle mode. Nicely painted, rubber tires and magnets to hold the doors shut. My only dislike is the hole on the top of the roof used for weapon storage. I feel they could of implemented designs used in the Masterpiece line where there is a spring loaded flap to cover up the hole, i.e. Sideswipe.  Transformation isn't too difficult. It's not exactly a fun transformation figure. The left knee flap on my copy was really hard to clip in. Now flipping out the small flap and securing the head assembly to the hood is the proper transformation and is a step that was missing from the instructions. But I think there is a reason they skip this step and made it a optional step. When that extra flap is plugged into the hood, the head assembly no longer falls into the chest cavity. But doing this, you kind of lose the downward tilt on the head. Meaning the figure can't look down. In fact, since the head is on a left /right swivel, when turning the head, the figure seems to look upwards when the head is turned to the left or right.  So for this picture, the figure can look downward when the head assembly isn't fasten to the hood. It's a good figure. It looks really good. But it still could of been better. There are lots of hollow o areas on this figure that is cover by flaps. The annoying part of these flaps is that they don't really secure in place. The sliver part the fills up the bottom of the leg, that part gets in the way of ankle movements. The side flap on side of the foot, that part would benefit from so kind of tab. It's just folds down without anything securing it in place. This problem is the same for the two flaps that hides the hollow o abdomen of the figure. The shoulder assembly and elbow design are also lacking. For some reason the double joint elbows just seem ackward the way they bend. The shoulder, aside from the wheels getting in its way, I just wish that it locked in place. Its a fun figure in that there are lots of articulation. But this figure isn't friendly when it come to posing. This is due to the multiple joints and parts getting in its way. |
|
|
|
Post by nikodiablo on Dec 7, 2016 8:48:39 GMT -5
That's cool. I was thinking about getting Lord Scorpion. But I am waiting to see how it scales with Transformers Titans Return figures. I was hoping to see a Scorponok that scaled nicely with Toyworld Infinorator but I am losing hope I will see that or Toyworld doing a Scorponok! LOL Saw some pictures of TW Infinitor and Lord Scorpion standing side by side, and Infinitor is significantly bigger. Not as bad as G1 Fort Max vs Scorponok though. Looking good SGV! Mine is yet to arrive, but at least I have MMC Carnifex and TFC Ironshell to look forward to when I return from my out of town trip. Made a pre-order for Maketoys' Downbeat as well, I wonder if I should have waited for Stepper repaint for J4ZZ! |
|
|
|
Post by rx79msg on Dec 7, 2016 14:56:29 GMT -5
"Saw some pictures of TW Infinitor and Lord Scorpion standing side by side, and Infinitor is significantly bigger. Not as bad as G1 Fort Max vs Scorponok though."
That's cool. Any chance you know the link to the picture so I can check that picture out? I would appreciate it.
|
|
|
|
Post by nikodiablo on Dec 7, 2016 23:26:11 GMT -5
|
|
|
|
Post by rx79msg on Dec 8, 2016 5:52:57 GMT -5
Thank you nikodiablo!
|
|
|
|
Post by KumaStyle.com (TJ) on Dec 26, 2016 22:33:27 GMT -5
|
|
|
|
Post by KumaStyle.com (TJ) on Dec 27, 2016 20:13:01 GMT -5
|
|
|
|
Post by Lejam on Dec 29, 2016 6:59:52 GMT -5
Nice to see you back on tracks TJ  DNA SUSANOO (not Blungeon) Expecting to get mine very soon and give some news on this one. |
|
|
|
Post by nikodiablo on Dec 29, 2016 7:22:23 GMT -5
Can't wait to hear your thoughts about it Lejam. From the video, the figure seems to be a bit fiddly and fragile, and not every step of the transformation process tabs in for security. I've pre-ordered it from a trusted local seller, nevertheless...
|
|
|
|
Post by KumaStyle.com (TJ) on Dec 31, 2016 12:49:59 GMT -5
|
|
|
|
Post by KumaStyle.com (TJ) on Mar 2, 2017 22:31:25 GMT -5
|
|
|
|
Post by KumaStyle.com (TJ) on Mar 6, 2017 14:09:49 GMT -5
|
|
|
|
Post by KumaStyle.com (TJ) on Mar 8, 2017 16:05:32 GMT -5
|
|
|
|
Post by KumaStyle.com (TJ) on Mar 10, 2017 12:01:04 GMT -5
|
|
