MP-01 Convoy Problem.

[Orbitron]

Last night I was playing with my Convoy and transforming it from vehicle to robot mode for the first time. Somehow his right foot fell from the ball joint.
Since the joint is hydrolic, I'm having a hard time putting it back because when I try pushing the foot to the ball joint, it pushes the joint back. Are any of you guys experienced the same problem? I'm affraid I might break it if I try to force it hard. My last alternative is to unscrew the foot. But I don't want to do that right now if there is another way.

Thanks in advance.

[admin1 aka Ed]

I had the same problem with the black hydraulic rams. That is your problem, right, the rams won't go in

?

If so, I ended up pointing the toe straight down so it is parallel to the legs (all straight) and then using just a bit of force.

For me that problem happened alot.

Ed

[Otaru Ikari]

Yeah had that problem too.

Just place the rods for the hydraulic first then apply force once you put the foot back on the ball joint.

Just secure the foot firmly, it will not be that hard to pop back in.

[Orbitron]

Thanks for the help guys.
I tried to push it back in and it poped back in but not all the way. And that makes the foot fall easily again. It looks like something is blocking the ball joint from going all the way. I checked the foot but there is nothing in there. I guess I just got one of those bad production. . Oh well so much for Master Piece.