|
Post by magengar on Jan 23, 2011 1:52:08 GMT -5
Hey, if it worked for you, go for it. Just be careful not to scrape too much or else the part will loosely fall off and get lost. On that last note, I sincerely hope no one here suffers any loss of small parts from these SRCs if they (Goddess forbid) dive off the shelf. The small parts could get lost Very VERY easily... ...if the family chihuahua is lying DEAD on the floor, you've found the lost part. ;D zozo-Magengar @ Magengar, Reideen comes with two 'pointing finger' hands, left & right. In the end, I took a scalpel and did a little bit of light scraping to make the blade fit in his gauntlet.
|
|
|
Post by enjoyjp on Jan 23, 2011 8:25:04 GMT -5
I for one would love to see a Dairenou SRC figure. }D Yeah !! dairenoh are so good design !! but,i really want Great Five from hikari sentai maskman ! i hope if some sentai robots become hit success sale,that bandai will think about soul of chogokin version !!
|
|
|
Post by Cedar on Jan 23, 2011 12:47:03 GMT -5
Btw, Godreideen, not as good as the regular Reideen. Although he looks good just standing there, his shoulders are pretty loose so he can't hold raised arm positions well. His headress also comes apart rather easily, like some snap on model kit; not what I'd expect for a figure in this line.
Disappointing for such an expensive figure and SRC's first miss, imho.
|
|
|
Post by goldorak on Jan 23, 2011 13:02:32 GMT -5
|
|
|
Post by TheMazingerZ on Jan 23, 2011 19:03:25 GMT -5
Beautiful pictures! Thanks!
}D
|
|
|
Post by magengar on Jan 23, 2011 22:28:55 GMT -5
LOL! SKLie took down an SOC! ;D Awesome pics! How did you get the background to look that good?
zozo-Magengar
|
|
|
Post by Dead-Man on Jan 24, 2011 3:08:44 GMT -5
|
|
|
Post by goldorak on Jan 24, 2011 3:55:51 GMT -5
LOL! SKLie took down an SOC! ;D Awesome pics! How did you get the background to look that good? zozo-Magengar it's only white paper...
|
|
|
Post by cooksux on Jan 24, 2011 16:40:26 GMT -5
I just got my Reideen the Brave, the swords don't fit well in his gauntlet. The hole in the gauntlet seems way too tight . Anyone else have this problem? I also got a warped finger on one of his grasping hands. It's because the chrome paint is too thick, and that hole isn't forgiving with how big the peg is. Here's my review
|
|
|
Post by magengar on Jan 24, 2011 23:40:58 GMT -5
That SRC Mazinger will Not forgive me if I don't score him soon. ;D I also want the Yuusha Raideen (1975 version) SRC as well... damn, those are really good sculpts for their size, IMHO. About that Yuusha Raideen SRC... those of you who now have it... is he standing up well with those weird jet feet? I try to pose my Miracle-Action Raideen in certain battle poses, but them bell-bottom feet just flop around and he falls over. I hope the ankles on this Yuusha Raideen SRC are sturdy enough to pose him in near-extreme battle stances, even with the added weight of his bow and arrow setup. zozo-Magengar
|
|
|
Post by nikodiablo on Jan 25, 2011 1:13:41 GMT -5
some new pics of Shinken-oh! I wish the SOC Dygenguar/Aussenseiter came with effect parts like this for the Tatsumaki Zankatou attacks. Really dig the Weissritter news, I can re-enact the "love-love attack" when it comes out ;D
|
|
|
Post by Dead-Man on Jan 25, 2011 14:42:39 GMT -5
new pic for Gear fighters SRC Dendoh & Knight Ogre
|
|
|
Post by TheMazingerZ on Jan 25, 2011 21:56:34 GMT -5
Hell yeah! Dendoh looks a lot better in white than silver. Can't wait for them to be released...!
}d
|
|
|
Post by chachipower on Jan 25, 2011 22:52:27 GMT -5
About that Yuusha Raideen SRC... those of you who now have it... is he standing up well with those weird jet feet? He actually stands quite fine, so no problems there. I dont know if it eventually gets loose after a few poses, but from what I see its good enough
|
|
|
Post by nikodiablo on Jan 25, 2011 23:05:52 GMT -5
My SRC Alt arrived yesterday, checked the inside but have not taken him out of his plastic coffin.
First impression: heavy!!! ;D
And I believe, this is the first time there's english text on the packaging that is not engrish ;D
|
|
|
Post by Dead-Man on Jan 27, 2011 20:34:33 GMT -5
Clearer pic for SRC WeiBritter
|
|
|
Post by nikodiablo on Jan 27, 2011 21:12:35 GMT -5
Nice! Thanks for sharing (it just made the wait more agonizing, actually) ;D
Is that the Composite Ver. Ka Exbein thrown into the mix?
|
|
|
Post by quinjester on Jan 27, 2011 21:31:35 GMT -5
Yup! They're marketing the Exbein at the same scale, but in a different product line.
|
|
|
Post by mechamasterj on Jan 27, 2011 21:37:02 GMT -5
hellz yes time to sell off some kits!!
|
|
|
Post by nikodiablo on Jan 27, 2011 23:07:50 GMT -5
I wonder why isn't there any news update about the Cybuster? If I remember correctly, Cybuster's prototype pictures surfaced earlier than Weiss', didn't it?
|
|