|
|
Post by Yumcha on Oct 31, 2013 11:34:50 GMT -5
Holy fark...I know I already have as many RX-78s as Mazinger Zs...but, man...this looks like a must-buy. Now, how do I tell the wife?
|
|
|
|
Post by ssorcam on Oct 31, 2013 14:05:32 GMT -5
Holy fark...I know I already have as many RX-78s as Mazinger Zs...but, man...this looks like a must-buy. Now, how do I tell the wife? I'm in the same situation |
|
|
|
Post by Chen on Oct 31, 2013 14:18:26 GMT -5
At 1/35scale this thing will be huge! I can see this figure being well over $500.
|
|
|
|
Post by clobberator on Oct 31, 2013 19:47:52 GMT -5
Jumbo Grade's 1/35 too right? They should do a Zeta or Nu or something instead..
|
|
|
|
Post by mecha-mania on Nov 1, 2013 5:38:13 GMT -5
the more I look at it, the more I like it. seriously considering getting a custom acrylic casing done to contain this big fella if I end up buying it.
|
|
|
|
Post by squall12 on Nov 1, 2013 7:21:03 GMT -5
like to buy it but dont have space to contain this beast.
|
|
|
|
Post by Mazinish on Nov 17, 2013 18:28:52 GMT -5
If it's under 1k I'm in.
So it has metal parts?! Inner frame?
|
|
|
|
Post by squall12 on Nov 17, 2013 21:03:09 GMT -5
yes if it same with all the metal composite gundam it will have the joint as metal...
|
|
|
|
Post by chogokinsnake on Apr 26, 2014 1:56:39 GMT -5
 It is coming..... Okay, time to rob a bank!!!  |
|
|
|
Post by Yumcha on Apr 26, 2014 12:22:55 GMT -5
Wow, that's a gorgeous.  |
|
|
|
Post by ulessa on Apr 26, 2014 13:37:50 GMT -5
Damn I forgot this was a thing. Still got to wonder about the articulation though with something that big. Metal Fix Figurations are more of an "Art" piece than a toy. Cool, but pass (getting something from future would be much more viable imo).
|
|
|
|
Post by recca74 on Apr 28, 2014 1:34:01 GMT -5
Is....there a price for this? *gulp* Actually?
Hmmm...very clever Bandai! 1/35 scale for a 35th anniversary.
|
|
|
|
Post by mecha-mania on Apr 28, 2014 7:34:19 GMT -5
Dont seem to see any preorder available for it.
|
|
|
|
Post by greengetterguy on Apr 28, 2014 14:00:17 GMT -5
Please If it's around $500 may be I can pull it off....
If it closer to 1000, then I give up.
|
|
|
|
Post by Yumcha on Apr 28, 2014 14:21:50 GMT -5
Please If it's around $500 may be I can pull it off.... If it closer to 1000, then I give up. Pffft...knowing Bandai's shenanigans, it'll sell out faster than you can say "Macross Frontier" and you'll not be able to preorder one anyhow. |
|
|
|
Post by ulessa on Apr 28, 2014 15:57:16 GMT -5
HGG Neo Zeong cost $250, a 80cm tall model kit. Diecast at GFF Mega scale would definitely run at least $450 (wishful thinking). Just my guess.
|
|
|
|
Post by squall12 on Apr 29, 2014 20:57:47 GMT -5
i might get it if less than uSD500.
|
|
|
|
Post by ulessa on May 3, 2014 18:57:25 GMT -5
I have some gripes with the head sculpt but damn that thing is impressive. Mainly the scale  |
|
|
|
Post by Theseus on Jun 21, 2014 10:01:55 GMT -5
If the scale is correct, this robot should be around 51cm / 20.2 inches high.
I suppose diecast parts will be only for joints, at best some inner frame parts (like metal composite). Hopefully ABS plastic for the rest. More diecast would dramatically increase the costs.
Even in this configuration, I think 50 000 JPY is a super floor price. depending on the quality material & inner frame. I can be wrong of course...
In any case, I don't think there will be more diecast parts than the upcoming Fewture ultimetal Optimus Prime. That being said, if I have to go for a super size robot, I prefer the Gundam Rx 78 design over the Transformers Leader.
|
|
|
|
Post by ulessa on Jun 21, 2014 11:08:03 GMT -5
If the scale is correct, this robot should be around 51cm / 20.2 inches high. I suppose diecast parts will be only for joints, at best some inner frame parts (like metal composite). Hopefully ABS plastic for the rest. More diecast would dramatically increase the costs. Even in this configuration, I think 50 000 JPY is a super floor price. depending on the quality material & inner frame. I can be wrong of course... In any case, I don't think there will be more diecast parts than the upcoming Fewture ultimetal Optimus Prime. That being said, if I have to go for a super size robot, I prefer the Gundam Rx 78 design over the Transformers Leader. I would say its safe to assume that its going to be the exact same as the previous Metal Composites and just be an upscaled version. Extra diecast would probably go to extra hinges and flaps for extra gimmicks and whatnot. |
|
