|
|
Post by neuromancer on Mar 11, 2015 2:23:59 GMT -5
Okay, opening a different thread for my 3D printed part experiments. There are better options get missing parts for incomplete toys. I think of this project as "placeholder" enough for me to display "junk" vintage pieces in relative acceptable completeness. With a handful of incomplete pieces in my storage box, its now time to gradually put them in the display cabinet. First up...... Popy GA-79 Danguard Ace DX: Full write-up here. |
|
|
|
Post by neuromancer on Mar 23, 2015 7:48:18 GMT -5
Next.... Popy GA-01 Mazinger Z Version 4: Short write up here.  |
|
|
|
Post by KingboyD on Mar 23, 2015 17:30:06 GMT -5
Very nice! I would love to see this progress to other parts. I have tons of stuff missing fists, etc. I had a friend make me a new head crest for the Chokinzoku. All I had was the hand weapon, an empty head, and photos. It took a lot of adjustments, but we finally ended up with something decent. I will post pics later. But if we can get high quality prints, then this would be awesome.
|
|
|
|
Post by admin1 aka Ed on Mar 23, 2015 20:21:30 GMT -5
The work looks great, thanks for sharing!
|
|
|
|
Post by magengar on Mar 24, 2015 0:20:11 GMT -5
Awesome job on that GA-01!  zozo-mag |
|
|
|
Post by neuromancer on Mar 25, 2015 5:35:01 GMT -5
|
|
|
|
Post by TheMazingerZ on Mar 25, 2015 12:40:48 GMT -5
Those come out so nice! Can you post the settings you are using on the 3D printer, please!  }D |
|
|
|
Post by neuromancer on Mar 25, 2015 21:51:22 GMT -5
Sure, nothing fancy though: As much as possible I try to not to stray too much from the default Makerbot slicer settings :  When I print test (grey) prints I normally use Standard. For mazinger-Z's chestpiece I had to pump up the infill by 30%. |
|
|
|
Post by TheMazingerZ on Mar 25, 2015 22:31:51 GMT -5
Awesome! Thanks bro! }D |
|
|
|
Post by mojacko on Apr 16, 2015 16:51:42 GMT -5
sweet....Voltes V is alive once again!!!
|
|
