|
|
Post by jmc on Sept 14, 2015 19:56:01 GMT -5
Hi,
I have a jumbo Dragun that I want to break down and wash. I noticed that there is a tear in the neck of the head. Is there any way to repair this? and is it possible to still remove the vinyl head?
|
|
|
|
Post by samazinga on Sept 15, 2015 18:41:45 GMT -5
Also interested in this. I have a Raideen I'm too afraid to mess with because of a torn horn.
|
|
|
|
Post by bowhntr66 on Sept 16, 2015 4:26:29 GMT -5
Heat it really well, until it gets soft, with a hair dryer. Makes it a lot easier to remove.
It's easy to repair the tear with super glue, from the inside. My glue of choice is made by Titebond. Do it from the inside if you can. Then reheat to put it back on.
|
|
|
|
Post by jmc on Sept 16, 2015 15:52:44 GMT -5
Heat it really well, until it gets soft, with a hair dryer. Makes it a lot easier to remove. It's easy to repair the tear with super glue, from the inside. My glue of choice is made by Titebond. Do it from the inside if you can. Then reheat to put it back on. Thanks. Would loctite glue work as well? |
|
|
|
Post by bowhntr66 on Sept 16, 2015 17:56:17 GMT -5
It should. Just be careful when putting it back on. Make sure the glue is really set or it could tear again.
|
|
|
|
Post by jmc on Sept 16, 2015 19:33:25 GMT -5
It should. Just be careful when putting it back on. Make sure the glue is really set or it could tear again. I'll let it cure for a day or so. Thank you! |
|
