|
|
Post by IronMonKey on Feb 3, 2018 12:36:45 GMT -5
Yes, I know. PULL!!!! Lol. So I just bought a Godaikin Golion and the red lion is stuck in the left side of the black lion. I have tried to pull as I would any other golion though this seems really stick. Any tips or tricks to remove without breaking anything would be greatly appreciated. Thanks
|
|
|
|
Post by crpdiablos on Feb 4, 2018 1:16:33 GMT -5
Man I would,just to be on the safe side, open the leg cover and fold the leg out and use a small flathead to lift on of the metal clips that holds the leg/arm post in. You shouldn't have to do both sides,one side should do . Once the clip is not longer pinching the grey tail the lion should slide out easy, if not then rotate the lion 180 degrees and repeat the procedure. With both clips oit of the way the lion should practicallu fall out and if it doenst them you gotz other problems like super glue or magic spells cast on voltron in the days of old
|
|
|
|
Post by Coletron on Feb 8, 2018 20:56:28 GMT -5
If my advice is too obvious, please forgive me. Are you pulling the Red Lion up as you pull out? It's underside acts as a wedge against the gold ring on Black Lion's shoulder. Also, I put a piece of paper between the lions where contact is made during disassembly. This keeps the gold ring from scratching.
I have 2 GoLions and I love them. Congratulations on your purchase! Let us know how things work out.
|
|
|
|
Post by IronMonKey on Feb 9, 2018 9:06:41 GMT -5
Thanks for all of the advice guys. I appreciate it. Finally got it out. I did remove the clips and it came out safe and sound. Thank goodness. Haha. Another red lion tail spared.
Thanks again guys.
|
|
