|
|
Post by GUYx1 on Mar 22, 2006 11:48:16 GMT -5
|
|
|
|
Post by hypnotator on Mar 24, 2006 6:27:24 GMT -5
What is the round swirly thing we see in the Black Riot parts picture but not the dressed figure? Dokuro King poo? He would have to have a rifled hole to lay that one, but maybe he does. Actually, I suspect it's an inner head, but designs for Walder poo would make a good thread.
|
|
|
|
Post by GUYx1 on Mar 24, 2006 11:17:54 GMT -5
Yes, you are correct that the mystery piece is an Inner head. The inner head in this case looks sort of like a Beehive covered with eyeballs.  Above is a photo of the Glow version Skull Toys inner head as displayed on a Shonen size WALDER figure. Cheers, Guy |
|
|
|
Post by hypnotator on Mar 24, 2006 11:52:45 GMT -5
I was right on both counts; it is an inner head and it looks like a very long poo. Or mayonnaise from a tube.
|
|
|
|
Post by cyborgbushcricket on Mar 24, 2006 15:05:48 GMT -5
those inner heads are cool, just wish they fit into the outer heads a bit better, with toxic phantom it can be managed (both! inner heads) with the hairdryer treatment, the cyclops inner head from satan king is a different matter, ive not tried it but unless it was heated substantially until very soft that is not going inside the outer head. Not got the dokuro update........yet.
actually the mayo poop head reminds me of scaroth from doctor who!
CBC.
|
|
|
|
Post by GUYx1 on Mar 24, 2006 18:13:09 GMT -5
Bush Cricket, Thanks for the Great Dr. Who Reference to the Scaroth  Cyborg Toys will always fall somewhere in the realm of Dr. Who for me, since I discovered the Denys fisher Cyborgs at about the same time I was obtaining the Dr.Who Denys Fisher toys. Have no fear! the inner Cyclops head will indeed fit inside the Akuma (Death Phantom) head. I heat everything before they go on or off of figures. ( I just dare you to safely remove one of those CYCOM cyborg ninja suits without a few minutes under a hair dryer!) For most vinyl subforms I usually use boiling water. It allows the heads to slide into almost anything. I slipped spare NHC heads inside the INNER HEADS on some modern costumes just for a better fit. Actually I slipped Shonen walder heads into the Shonen subforms as well. Now those loose fitting noggins never come off... - Guy |
|
|
|
Post by cyborgbushcricket on Mar 24, 2006 19:04:12 GMT -5
guy, ah yes, I use hot water on the akuma cyclops head and it went in no problem, I didnt realise just how soft the vinyl becomes, it actually forms a nice neck for the main head to sit on. Cool.
CBC.
|
|
