|
Post by gaogaigod on Oct 15, 2005 21:26:19 GMT -5
i'm so frustrated that gravity has affected my brave gokin gaogaigar. i don't have many toys on display but the ones i do seem to be in good shape. except my gaogaigar. he fell from his ledge and one of the pieces that connect stealth gao to gaigar broke. so a quick question. should i get the stargaogaigar set and forget about it, or should i super glue it back on?
|
|
|
Post by mpchi on Oct 15, 2005 23:29:38 GMT -5
Unless you have a lot of money to burn, and you plan to get the power-up set anyway, I would just super glue it. At least give it a try first. I bet its one of the 2 clamps that you broke. They look thick enough to be able to be glued back while still being strong enough to hold. Just get some good brand liquid super glue, and if necessary, add a little more glue on the outside to wrap around the broken seam, if you don't mind it being slightly visible. The liquid super glue should still stay pretty clear after dry after you wipe off the white powdery residue. Shouldn't be too noticable.
I would say only get another set unless nothing you tried works, as those clamps you can barely see any flaws you may have, and they are black. Good luck.
|
|
|
Post by xiombarg on Oct 16, 2005 14:53:57 GMT -5
Get your glue from a hobby shop. I wouldn't recommend the average super glue you buy in a hardware store because it's not very strong.
|
|
|
Post by gaogaigod on Oct 16, 2005 19:01:27 GMT -5
i'll definetly give that a try. thanks guys.
|
|
|
Post by mayita on Oct 16, 2005 21:11:09 GMT -5
use resin (recast resin) then sand the part or where you applied the resin and then air brushed it will look lik enew trust me
|
|
|
Post by gaogaigod on Oct 16, 2005 22:10:35 GMT -5
well i don't want to deal with taking the stealth gao apart
|
|
|
Post by mayita on Oct 17, 2005 4:45:07 GMT -5
To me resin is the best super glue
|
|
|
Post by gaogaigod on Oct 30, 2005 22:17:49 GMT -5
i'm thinking it might be best to get a new one. gravity has taken affect of him again and split the lions head at the seam. and the glue still isn't working on the stealth gao. does anyone know where i can find some resin cast?
|
|