|
Post by boricua on Jun 28, 2011 13:39:58 GMT -5
|
|
|
Post by mrclean08 on Jun 28, 2011 20:23:23 GMT -5
Is there an English version of that site?
|
|
|
Post by plasticdiecast on Jun 28, 2011 21:25:38 GMT -5
i know this is a no brainer question but i supposed those HANDS comes pre-painted black? thanks for the link,,,i wonder how'd you able to get through the check-out if you can't read the signs,,,,unless you can
|
|
|
Post by TheMazingerZ on Jun 28, 2011 21:39:10 GMT -5
Yeah, the hands come pre-painted in black for God Mars or Blue for Daltanius, but they are the same hands. Right now I'm having a little trouble with the seller, as he is telling me it is not his fault the Cross got broken and does not want to refund my money. However, the fact remains that the hands are awesome. Just email him at wuncin9999@gmail.com and ask him about the hands. Keep your email as short and to the point as possible, and write it in very plain english. Oh, and don't buy the Cross...
}D
|
|
|
Post by droutmaster on Jun 28, 2011 21:55:19 GMT -5
sorry to hear that the seller is not been so cooperative. he should at least send you a newer cross.
so what are you gonna do TMZ, are you gonna make another cross?
|
|
|
Post by plasticdiecast on Jun 28, 2011 22:20:25 GMT -5
thanks "themazingerz" for the heads up,,, its a bummer you've got to go through all that,,,good luck with the cross,,,
|
|
|
Post by plasticdiecast on Jun 28, 2011 22:27:09 GMT -5
the cross seems not too difficult to replicate, if you can find a "pla plates with the right size you can put them together or a pcs of yellow plastic sheet cut to size and spray paint it,,, just my 2c or repair that broken pcs the good old fashion way "glue and patty" after it dried up you can sand paper the excess and spray paint the whole thing,,, lots of work but it sure be worth a try,,, -0-
|
|
|
Post by TheMazingerZ on Jun 28, 2011 23:25:46 GMT -5
Thanks guys! Well, I don't think this cross can be put together again. The material used to make it is very, very brittle - it feels and behaves just like the old 1980's Popy blue plastic, basically it crumbles apart. Anyway, we'll see what can be done. As far as the seller not being reasonable, oh well, I'm almost sure Paypal will handle my claim appropriately.
}D
|
|
|
Post by droutmaster on Jun 29, 2011 12:57:59 GMT -5
btw, what about the lighting effect, does it feel like it would crumble like the cross or is it a bit more better? and if so can you just glue it all back if possible?
|
|
|
Post by supergetterv on Jun 29, 2011 14:25:03 GMT -5
Take the cross design to tap plastic and have them replicate/cut it out of plexiglas. I would then get some clear yellow and just spray it. Or just have them replicate it in clear yellow plastic. There is a Tap plastic store over in San Leandro.
|
|
|
Post by xTIMMYxCOREx on Jul 4, 2011 4:06:16 GMT -5
Ok, so I resisted buying this one for so long. First off, I have never seen the TV series. But this weekend at Anime Expo I saw Daltanious in the case at the Bandai exhibit and I was just "OMG Wow That is Amazing" and picked it up. Saw some friends from work who now think I am insane for buying a $230 robot, but I confirmed their belief by telling them I have about 100 more at my house.
|
|
|
Post by mrclean08 on Jul 4, 2011 10:23:53 GMT -5
I also went to AX too yesterday. It was my first time attending and I was hoping to see lots of gokin products. They had a lot of Gundam; however, there were only few gokins. I hardly saw any SOC. Congrats on picking up Daltanious. He truly is a treasure to behold.
|
|
|
Post by nikodiablo on Jul 4, 2011 21:34:50 GMT -5
Saw some friends from work who now think I am insane for buying a $230 robot, but I confirmed their belief by telling them I have about 100 more at my house. LOL ;D ;D ;D
|
|
|
Post by Chen on Aug 26, 2011 5:23:56 GMT -5
Anybody else have lose elbow joints on their combined Daltanius? I noticed on mine the arm that's holding the sword that the elbow joint can hardly hold up the sword anymore. I knew when I saw the small joint that it would be a problem plus Daltaniius' sword is pretty large and heavy. I tried to tighten the screw for that joint but that didn't do much, I wish it were more like Daitarn's elbow joints with nice stiff ratcheted joints.
|
|
|
Post by B- on Sept 24, 2011 21:26:06 GMT -5
Just got another Daltanious,thought Id do a new setup for cabinet,GeneraL Daimos and Zambot 3 look well with him..COLORS FLOW NICE..{doesnt the little Yellow jet for daimos under the clear box look like it goes with daltanious more?! haha}also found some clear plex beanie baby boxes at the local salvation army,they work GREAT as risers,also use one to raise up my Raideen Mountain * BTW Chen just do like I did dont bend teh elbow jaoint and just angle teh sword upright,the wrist joint will hold,Im sure it will loosen up too after a while,but its better than loose elbow joints getting worse..
|
|
|
Post by zephyranthes on Jul 4, 2012 1:14:56 GMT -5
Got my Daltanious yesterday. What a fantastic piece it is. The combined form is impressive in size/heft.
|
|
|
Post by Philo Beddoe on Jul 4, 2012 1:45:29 GMT -5
Where did you get yours from zephyranthes?
|
|
|
Post by zephyranthes on Jul 5, 2012 1:55:43 GMT -5
Got it used from a fellow RJ member.
|
|
|
Post by mazfan on Apr 3, 2013 0:02:00 GMT -5
I'm finally going to get mine soon... I am so excited!
|
|
|
Post by zephyranthes on Apr 3, 2013 0:07:00 GMT -5
It's a great piece. Hope you enjoy it.
|
|