|
|
Post by sta on Apr 17, 2018 18:25:22 GMT -5
hey TJ I had a Q, have you found the red paint flaking/chipping problem to be present in the re-edit iron men? any tips for avoiding/preventing it if it is present/likely?
|
|
|
|
Post by KumaStyle.com (TJ) on Apr 18, 2018 7:14:25 GMT -5
hey TJ I had a Q, have you found the red paint flaking/chipping problem to be present in the re-edit iron men? any tips for avoiding/preventing it if it is present/likely? Thankfully I have not even though I've read plenty of reports on the contrary with Sentinel products having problem with that "candy" red in general (Their Baikanfu is the most recent victim of it.) If it happened to me I honestly have no idea of how I'd prevent it but from the way it looks is that there's something off about the mixture of the paint and it's prone to "bake" in terms of swelling and cracking. My only guess is that it'd be heat that causes it so maybe just keeping them in decently ventilated rooms and a good distance from lights is key. |
|
|
|
Post by KumaStyle.com (TJ) on May 25, 2018 13:24:49 GMT -5
|
|
|
|
Post by KumaStyle.com (TJ) on May 28, 2018 22:55:22 GMT -5
|
|
|
|
Post by KumaStyle.com (TJ) on Jun 14, 2018 1:03:47 GMT -5
|
|
|
|
Post by KumaStyle.com (TJ) on Jun 17, 2018 12:03:32 GMT -5
|
|
|
|
Post by KumaStyle.com (TJ) on Jun 17, 2018 21:11:51 GMT -5
Got the full review and galla up for Sentinel's Re:Edit 13 Howard Armor. kumastyledesigns.com/sentinel-house-of-m-howard-review/ This is one of the most bizarre productions runs I've ever seen for one of the best figures I've ever owned. The review linked gives the full breakdown but here are a few pics from the gallery:  Here's my personal favorite; a recreation of the House of M Chapter 3 "Doomsday" cover featuring Re:Edit 12 House of M Tony Stark as well:
|
|
|
|
Post by KumaStyle.com (TJ) on Jul 28, 2018 17:24:31 GMT -5
|
|
|
|
Post by greengetterguy on Jul 28, 2018 18:43:53 GMT -5
Dayum...
Nothing like Sentinel black....nobody does it better.
(Although GX70 Noir is something else )
|
|
|
|
Post by KumaStyle.com (TJ) on Aug 1, 2018 18:17:27 GMT -5
|
|
|
|
Post by KumaStyle.com (TJ) on Aug 1, 2018 22:05:19 GMT -5
|
|
|
|
Post by Coldbreakar on Feb 20, 2019 0:56:41 GMT -5
Hello bros,
I got myself a brand new Re:Edit #05 HulkBuster and out of box both upper elbows joints are loose, they can't hold the full elbow bend but they stay at 90 degrees.
Is that a normal QC issue or mine is a defective one?
Is there a fix to this problem or should I return it to the seller?
Thanks in advance.
|
|
|
|
Post by KumaStyle.com (TJ) on Feb 20, 2019 22:18:03 GMT -5
Hello bros, I got myself a brand new Re:Edit #05 HulkBuster and out of box both upper elbows joints are loose, they can't hold the full elbow bend but they stay at 90 degrees. Is that a normal QC issue or mine is a defective one? Is there a fix to this problem or should I return it to the seller? Thanks in advance. The screws to open these products up are hidden so unfortunately there's no way to get in and do anything to tighten it. Personally mine didn't have that issue and it's not something I've read about being common. I'd just go through either your retailer or Bluefin to get a replacement going. |
|
|
|
Post by Coldbreakar on Feb 26, 2019 6:32:44 GMT -5
Hello bros, I got myself a brand new Re:Edit #05 HulkBuster and out of box both upper elbows joints are loose, they can't hold the full elbow bend but they stay at 90 degrees. Is that a normal QC issue or mine is a defective one? Is there a fix to this problem or should I return it to the seller? Thanks in advance. The screws to open these products up are hidden so unfortunately there's no way to get in and do anything to tighten it. Personally mine didn't have that issue and it's not something I've read about being common. I'd just go through either your retailer or Bluefin to get a replacement going.
Sorry for the late reply. Thank you for the advice TJ. 
After a long think I've decided to return the figure back to the seller, it is unfortunate that I can't do anything to tighten the screws since I'm not a customizer and don't want to damage this piece of art.
Will try to get it again in the near future.
Also this HulkBuster reminds me of the X-Men's Juggernaut that's why I like this version more then the Age of Ultron one.
 |
|
|
|
Post by sta on Sept 4, 2019 18:13:16 GMT -5
so is the line dead?
|
|
|
|
Post by f360 on Sept 4, 2019 19:24:13 GMT -5
maybe ,haven't seen anything new after their spider-man.
|
|
|
|
Post by KumaStyle.com (TJ) on Sept 4, 2019 20:14:10 GMT -5
Not dead. Master Chief has been announced and promo pics have been shown.
|
|
|
|
Post by KumaStyle.com (TJ) on Mar 25, 2020 16:20:08 GMT -5
|
|
