|
Post by Fontes on Apr 17, 2015 15:11:28 GMT -5
Here's one that I'm a part of, as the game's artist:
/
So, what's this about? To put it short, it's a board game where you play as a TCG/CCG collector and duelist. Consider it a way to enjoy a TCG without the need to sell your kidneys to buy booster packs!
Theme-wise, this is one of those "turn your brain off and enjoy" type of games. I think you can see why by scrolling down to see the card set samples.
Well, I have nothin' else to say except my usual: if you can't back it, at least spread it!
|
|
|
Post by Fontes on Mar 29, 2015 15:45:07 GMT -5
Provided it allows for at least the same result as current 3D printers, in the long run it outta at least make 3D printing service sites cheaper, mostly due to how fast things will get done.
One thing is certain, it looks hella cool to see the object rising from the goop. XD
|
|
|
Post by Fontes on Mar 21, 2015 23:04:21 GMT -5
Well, I don't condone him for it. I mean, I got a project of my own, so that'd make a huge hypocrite outta me. Anyway, any chance of an Android version? You'd effectively double your target audience by getting one out the door. plus, I'd be able to try it. XD
|
|
|
Post by Fontes on Mar 19, 2015 14:22:31 GMT -5
Whoops, seems I wasn't aware that the OP took part in the game's development. Though, in my defense, mention of such is pretty much absent. With that said, I mentioned Destroy Gunners in a "let's throw more options at the table" mindset, with no intentions to undermine the OP's project. Sorry 'bout that!
|
|
|
Post by Fontes on Mar 18, 2015 22:21:09 GMT -5
In the same vein, you got the Destroy Gunners series. Both for iOS and Android.
|
|
|
Post by Fontes on Mar 17, 2015 10:58:04 GMT -5
Personally I like the SRC version more in terms of proportions. Not for accuracy, but looks much more dynamic.
|
|
|
Post by Fontes on Mar 16, 2015 13:05:21 GMT -5
"Oh, we have two products based on the SAME source material. OH MY GOD, THEY LOOK SIMILAR!!!"
... like, seriously?! XD
|
|
|
Post by Fontes on Mar 12, 2015 10:34:10 GMT -5
So it IS a model kit after all!... and from the images, mobility's kinda iffy. Either that or the dude who took the photos doesn't know how to make poses.
|
|
|
Post by Fontes on Mar 10, 2015 7:31:58 GMT -5
Man, those look so DAMN good for their scale! If you don't mind me asking, exactly how much did these go for, if you did use an online service?
Also, it's just my opinion, but don't coat these. Sand off some of those hair-like excess, but other than that, I'm digging the rough texture of the print itself.
|
|
|
Post by Fontes on Mar 9, 2015 23:14:20 GMT -5
|
|
|
Post by Fontes on Mar 9, 2015 22:49:46 GMT -5
That's quite a fitting name for a 3D printer, given what you'll be doing with it.
|
|
|
Post by Fontes on Mar 5, 2015 17:54:21 GMT -5
AAAAAAAAAaaaaaaaand the piece has arrived! And yep, it's the one! My GFG is now complete! Thanks a lot for the help!
|
|
|
Post by Fontes on Mar 5, 2015 1:27:38 GMT -5
Fontes - Shapeways, yeah. Actually I test uploaded my file. While there are minor issues that I could correct (site tools auto corrected as well), it is printable in its current state. The price for a "chogokin" like stainless steel is estimated at 378-382USD. And a plain white strong flexible plastic is at 50USD. Was gonna go for precious metals but the bounding box was just too big. I think I need to hollow out the bases and reduce the size further. My end goal is to be able to print them in metal miniatures. Yeah... those prices are a lil heart-attack inducing, to say the least. My plans is for small 5cm-tall miniatures, though, so here's hope that I'll face myself with a workable budget. Specially since I'll be sure to get a VERY big axe when it comes to shipping to Portugal, AND possible customs...
|
|
|
Post by Fontes on Mar 4, 2015 14:39:59 GMT -5
Regardless if you applied that coating well or not, I personally like their "out of the printer" look quite a bit. Very nice job on these, indeed! I gotta send something to Shapeways, one of these days.
|
|
|
Post by Fontes on Mar 1, 2015 19:16:34 GMT -5
So, Ive sent those to the seller, and he sent me this pic of a part he's got lying around that seems to fit the description: prntscr.com/6bkxw3It DOES seem to be it, but I don't want the poor shmuck to spend 5 bucks sending this (portuguese mail, wohoo!), and in the end it ain't it. So... is that it? XD
|
|
|
Post by Fontes on Feb 28, 2015 21:51:28 GMT -5
Well, I for one believe Choryujin and Gekiryujin are perfectly possible as a SoC. If there's anything we can say about GGG and the Brave series in general is that in terms of enginering, their transformation sequences do seem more plausible than average.
|
|
|
Post by Fontes on Feb 28, 2015 1:57:50 GMT -5
Gaofighgar's head is mounted to a new neck piece that covers up Gaofar's back that the Stealth Gao connects to. You're using Gaofar's neck which doesnt have that piece. Ah, that makes sense. Do you happen to be able to give me a visual on said part? The guy I've made the deal with lives a tad far for me to just go there and help him see if he does have it. :/
|
|
|
Post by Fontes on Feb 26, 2015 18:14:02 GMT -5
I'll just say I've seen better in Kinder Surprise eggs...
|
|
|
Post by Fontes on Feb 26, 2015 18:11:02 GMT -5
DISCLAIMER: I know it's a videogame-oriented section, but it's more fitting than the "Break Time" board since it's still a game, even though it doesn't use electricity. So, this one's from me. The art, at least. It's a small and simple "Push your luck" styled game featuring a bunch of adventurers defending a village from a group of goblins. Any more info, there's always the left or middle mouse buttons to check the KS itself. To those willing to lend a monetary hand, thanks in advance. To those now able to do so, but press them share buttons, and whatnot, thanks as well. Every lil' bit helps!
|
|
|
Post by Fontes on Feb 26, 2015 0:31:43 GMT -5
Now that I think about it, maybe THAT is why there are no decent Mazinger kits. They'd have to be MUCH cheaper than the expensive as fudge Chogokins, and since many already have the habit of painting their kits, color variations wouldn't be that much a problem.
... them ba$t*rdS!!! Just you wait till I get my hands on a 3D printer! Just you wait!!! I'll even 3D-print the friggin' nippers!
|
|